The wall molding system is in the form of panels and in specific dimensions with a plywood surface, which is a high-strength alloy pipe with a special geometric shape to increase the flexural strength of the cross section. Due to the large dimensions of these panels, welding and fabrication should be done by Fixed and done robotically, and due to the presence of a round profile, the life of the plywood used is increased due to its protection
- – Standard and large dimensions and consequently reducing the lines on the concrete facade
- – Creating regular lines on the concrete façade
- The possibility of using panels in both double-sided and one-sided walls
- The optimal weight of the molds while not needing any backing when used as a double-sided wall
- Due to the round frame frame, the plywood surface is protected and its service life and replacement time are increased.
- If a tower crane is used at the project site, once the panels are assembled, they are transferred seamlessly and there is no need to open and close the parts each time, reducing the molding time in both one-way and two-way mode.
- Accuracy, speed and high quality in construction due to the robotic production of these panels
- Standard dimensions and usability in any formatting plan
- Possibility to use the panels both standing and lying down
- Has a bearing capacity of panels for a maximum concreting pressure equal to 80 kN / m2
- Ease of assembly due to the use of simple rotary locks to connect the panels
